INDIGO PINK NO.1. NO FILE BUILDER - NO-FILE GEL - 15 G

Meet the most advanced gel in Indigo's history.
An innovative formula architecture means the gel self-levels and won't flood the cuticles — you can work without a file, or cut down filing to just cosmetic touch-ups. The smile line/light line comes out perfectly, every time.
No-Wipe Builder has such strong adhesion that it lets you work without a base coat and without a primer — using the thin-layer technique — not just at the cuticles, but along the lateral (side) walls too.
When working with thicker layers, a base and primer should be used, and the gel should be cured for at least 90 seconds.
One gel for everything: strengthen the natural nail plate and build a long, salon-style square-to-oval shape on a form.
Work with technology you won't find anywhere else.
Consistency: medium-thick Viscosity: high Self-leveling: fast, self-levels on its own Cure time: 60 seconds; for long nails with a high apex, 90–120 seconds Adhesion: very high (!) Difficulty level: very easy (perfect for beginners)Coverage level: high After curing: hard and durable, not brittle For problem nails: Yes (tested on models with excessive sweating and hormonal imbalances) Formula developed over more than 18 months — every detail tested so you can work faster, with more confidence, and without compromise.
Pink no.1 – A natural, delicate pink – great for French manicures and for wearing solo.
Skeleton cure time: 60 seconds Tunnel-clamp time: 5–10 seconds (depending on lamp power) Cure time for a built nail: 90–120 seconds (depending on apex height and lamp power) Polymerization temperature: moderate – comfortable for the client Contains particles/glitter: no
Application tips
Step 1: Nail plate preparation Remove the cuticles from the nail plate. Then matte the surface with a 180/240 grit file or a mandrel of 180, 200, or 260 grit — to increase product adhesion.
Step 2: Cleansing Dust off the nails with a dust brush. Wipe the nail plate with Cleaner No.1 to remove moisture and any contaminants.
Step 3: Slip layer Apply a thin layer of gel to the nail plate. Do not cure at this stage.
Step 4: Building the structure and the smile line Pick up a small drop of gel (depending on nail length) and apply it at 1/3 of the nail length, at the apex area. Bring it up to the cuticle and spread the gel along the entire length of the nail using your preferred technique. Shape the smile/light line with a thin Master NailArt 006 or Master NailArt 007 brush, then cure for 60 seconds. Make sure there's minimal product near the side walls/cuticle area. Remember — you can also shape the smile line by gently tilting the client's hand downward.
Step 5: Apply the hybrid Top coat, shape the smile line with a thin Master NailArt 006 or Master NailArt 007 brush.
Composition Bis-HEMA Polyneopentyl Glycol Adipate/IPDI Copolymer, Polyether Urethane Methacrylate, Hydroxypropyl Methacrylate, 2-(Methacryloyloxy)ethylsuccinate, Silica Dimethicone Silylate, Ethylhexyl Acrylate, PEG-3 Trimethylolpropane Triacrylate, Ethyl Trimethylbenzoyl Phenylphosphinate, Cellulose Acetate Butyrate, Polyester Resin, BHT +/- CI 19140, CI 74160, CI 45160, CI 45175, CI 77891, CI 73360
Warnings For professional use only. Read directions for use carefully before first use. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Avoid inhalation of dust during filing. Keep out of reach of children. Product may cause skin and eye irritation. May cause an allergic reaction.