DARK Blunt-end Flame Cutter 2.3*10 mm (Red)

Blunt flame drill bit helps to carefully and quickly perform manicure and pedicure in both machine and combined manicure/pedicure techniques, gently lifts the cuticle, cleans the lateral folds and bruises, and polishes rough skin. It is especially suitable for beginners with little experience in manicure; thanks to its rounded tip, it minimizes the risk of nicks in the cuticle area and on the lateral folds.
Specifications:
High quality diamond coating;
Withstand dry-heat treatment;
Do not rust during sterilization;
Have uniform diamond coating;
Will help to carefully and quickly perform manicure and pedicure in machine and combined manicure/pedicure techniques;
Resistant to temperature, moisture and steam;
Diamond particles are additionally sieved, therefore they have uniform geometric shape and are perfectly evenly coated on the drill bit;
The base of each drill is checked for radial runout;
The coating is checked under a microscope.
Red grit: Suitable for working with normal, thin, soft and sensitive skin, as well as for processing light calluses, corns and cracks, finishing polishing.
Usage recommendations:
RPM: 10,000-20,000 for machines with power 30-65 watts;
Disinfection: disinfectant solution or a special solution for processing bits.
We do not recommend cleaning diamond bits with metal brushes; it is better to use a plastic brush with stiff bristles.
Sterilization: autoclave or dry heat; be sure to pre-dry using the drying mode in a dryer/UV lamp for instrument storage or simply in the air (in a separate clean area) for no less than 6 hours.